Ceramic Coating Process

^{Step 1}

^{After a normal exterior wash and dry, Grizzly deep cleans your paint to remove all embedded particles, brake dust elements and iron contaminants which are highly resistant to traditional washes. This is accomplished using a clay mitt, a lubricating agent and a chemical bath to smooth the paint before we polish.}

^{Step 2}

^{Next, we re-surface your clear-coat which means that the vehicle receives a full paint enhancement or paint restoration to remove swirls, scratches and abrasions. This reveals a clean, virgin layer of clear which is then ready for the ceramic coating treatment.}

^{Step 3}

^{Lastly, we apply the exclusive System X professional ceramic coating. This is applied in two steps; first the product is spread onto the surface in a checkboard pattern, careful to overlap on adjacent strokes. After dwelling the required amount of time (this varies according to the System X product used) the ceramic is then 'leveled' with a low-nap micro-fiber towel, followed by a plush towel to buff the surface to the final shine.}

^{This process is continued in 2'x2' sections all around the vehicle until completed.}

_Finale

_{Following a final quality-check inspection, top to bottom, we present your vehicle for delivery.}

_Aftercare

_{Avoid getting the newly coated vehicle wet for 4 hours after application and it can be washed normally in 7 days. (We highly recommend using brushless car washes or hand washing, normally).}